Logo Bendywood®

Roll 2x55x350 mm
in Bendywood®-beech

To ensure the role’s stability, 2 layers of Bendywood® were glued together, yet without disrupting them.

For this purpose, a 0,9 mm deep notch was milled into a 1 mm thick piece of Bendywood®-beech. The flimsy connection (0,1 mm) allows both “halves” to be folded, without cracking. During the bending, it is important to proceed slowly, in order to prevent the connection from breaking. Achieved bending radius = 1 mm!

Subsequently, both “halves” of the folded piece were glued together (using glue with a long open time), bent around a small mould and fixed with a clamp until the glue had dried.